These BMW brake caliper decals restore the M Sport look in minutes, covering faded or chipped caliper paint with a fresh high-temp vinyl finish that holds up to regular brake heat cycling.
- Set of 6 decals, sized for both front (large) and rear (smaller) calipers
- High-temperature vinyl, rated for repeated brake heat cycles without peeling or bubbling
- Pre-cut to standard BMW M Sport caliper dimensions, no trimming required
- Includes M Sport triple-stripe ///M logo in correct proportions
- Application squeegee and instructions included
- Works on painted, powder-coated, or bare metal caliper surfaces
Installation
Clean the caliper face with isopropyl alcohol, peel the backing, position, and press firmly. Best applied at room temperature on a freshly cleaned surface. Allow 24 hours before driving to let the adhesive fully cure. Replace every 2-3 years or when the vinyl shows wear.
Fits 228i, 328i, 335i, 428i, 435i, 528i, 535i, 640i, M2, M3, M4, M5, X3 and X5 M Sport Models
Universal-fit for standard M Sport caliper dimensions across the BMW lineup, see the fitment table below for series and chassis coverage.
Fitment & Specs
| Fits | All BMW M Sport brake calipers, front (large) + rear (small) sizes |
| Colors | White, Black |
| Set | 6 decals |
| Note | Not for M Performance / carbon-ceramic calipers unless dimensions verified |
Frequently Asked Questions
Will they survive brake heat?
High-temperature vinyl rated for repeated caliper thermal cycling, no peeling or bubbling.
Decals or repaint?
Decals give a 20-minute reversible refresh versus a full caliper repaint.
Do I need to remove the calipers?
No, clean the caliper face and apply in place.
Pair these with a set of BMW rear brake pads for a full braking refresh, or browse the rest of our BMW accessories collection.
Reviews
There are no reviews yet.